Home > Error Code > Hyosung Atm Error Code 3-d1500(00)

Hyosung Atm Error Code 3-d1500(00)

Contents

Do RESET at Operator Function 2. Clear the error. 3. Use an electrical parts contact cleaner on terminals. Paper of a lesser thickness is more prone to jamming. 20012 Receipt printer feed lever open Close the feed tray on the printer. have a peek here

PURGE the dispensing mechanism. This error is of concern only if it is repeated. Install the Reject Vault. Error Code: 102 (66h) Description: Error (Pick Motor over current) Recommended Action: 1. https://www.nasatm.com/error_codes/code/D1500/

Nautilus Hyosung Error Codes

Call your attendant1800CE, 2700CE, 5000CE, 5300CE97923XXDEV_MCU FATALERROR (WARNING)1. Call your attendant 400000000Dark light sensor test error (CS41A, CS41B) during initializing.1. Check CS3 Sensor Cable4.

  • Clean CS21800CE, 2700CE, 5000CE, 5300CE4001400CS4A sensor detects note in delivery path before/after CDU dispenses1.
  • This error code will cause the cash dispenser to go "Out of Service".
  • Reboot ATM 2.
  • Error Code: 348(60h)['] Description: Dispenser internal error.
  • Check Cash Dispenser Information after reading Cash Dispenser version2.
  • Refer to Section 4 of the RL5000 Installation and Service Manual or the RL5000 Quick Reference Guide for instructions.
  • If these actions have no effect on dispenser operation, replace the dispenser mechanism.
  • Contact manufacturer.C007xSensor failureCheck sensors for debris.
  • Reset the cash dispenser and clear the error.

Check if the CS5 cable is disconnected (CS5_1:Cash Dispenser B/D CN10 #11~12, 25~28/ CS5_2:CN12)1800CE, 2700CE, 5000CE, 5300CE4006A00CS15AB ~ CS13 Time out(Jam) during dispensing bills from second cassette.N/A1800CE, 2700CE, 5000CE, 5300CE4006B00Something is Check for unplugged sensors. New ATM Machines Nautilus (Hyosung) Triton Hantle Genmega Used ATM Machines Nautilus (Hyosung) Triton Hantle Genmega ATM Parts Nautilus (Hyosung) Triton Hantle Genmega POS Equipment Verifone Hypercom Momentum Nurit ATM Paper Epp Error Atm Check the reject analysis to determine the cause of reject (reports menu).

Check Sensor(CS6) Poll 3. Hyosung Error Code 97999 Exchange sensor after abnormal operating CS13 Sensor 4004600Program error(Separated rejection)1. Initialize 3. useful reference Check notes in 1Cassette2.

Verify that version of Mini-Bank Software matches host processor. Hyosung 1800 Error Codes Error Code: 53 (35h) Description: EPROM error Recommended Action: A mechanical failure has occurred. C0041 Tried to dispense notes more than 5 times Check the condition of the cash in the cassette. Move the vault switch forward to aid door clearance problems.

Hyosung Error Code 97999

Remove foreign objects on 1 Cassette Clutch Encoder Slit.4. browse this site C001x CDU sensor is tripped Most typically a COO11 error, this would indicate a bill jam at the exit sensor of the Cash Dispenser. Nautilus Hyosung Error Codes Check if printer head lever is properly close 20809No sensing black mark (dark sensor)1. Hyosung Error Code 97999(04) Check settings of 4 Cassette FM Board Dip Switch (#3, #5, #6 On) 6.

Remove jammed notes on CDU return path 2. http://bookmarq.net/error-code/ibm-error-code-173.php Remove any jammed bills from the dispenser, if no bills are present try using compressed air to clean the dispenser (a sensor may be blocked by dust). Set cassette #2 correctly 2. Mount the retract box or open the box cover2. Hyosung Epp Error

Initialize after removing notes or dust2. Error Code: 304(34h)[4] Description: Rejected notes. Check the wiring connections to the solenoid(s). Check This Out Exchange Sensor after abnormal operating CS3 Gate detecting Sensor 5.

Reboot ATM 2. Hyosung 2700 Error Codes If the test dispenses are normal and the status clears, place the cash dispenser in service. If error occurs when checking CS11A cable operation, replace a sensor. 3.

Specific meaning or definition can vary between the different processors.

Check the Cutter module 2. Error Code: 132 Description: Error code reports bad doubles detect in last dispense. Your cache administrator is webmaster. Hyosung Tech Support D1706 Modem connection error Phone line connected to ATM will not support data communication.

Replace the reject solenoid 1 4005700Cash dispenser configuration error1. Do several test dispense operations. Exchange CS8 Encoder Slit Sensor1800CE, 2700CE, 5000CE, 5300CE4004500In case the number of notes detected outlet sensor(CS13) is more than required notes1. this contact form Replace Mainboard F0015 ATM Serial No.

Error Code: 136 Description: Modem initialization failed. Call your attendant1800CE, 2700CE, 5000CE, 5300CE972213Non-Indexed value for Indexed Field1. Otherwise the dispenser may require service1700, 1700W, 2100T, C4000, G1900, G2500, GT3000, MB1000, MB1500, MB1800, MB2000, MB2100, T4000C0030CDU motor failureMotor speed (measured at the encoder wheel) was not within spec. Check if 3 Cassette FM B/D CN2 and 4 Cassette FM B/D CN1 are connected. 5.

Remove note from the CDU delivery path. 2. Clean the sensors (CS1~CS15) in cash dispenser 4006000Something is detected in C331A, CS31B sensor before dispense operation 4006100Something is detected in C331A, CS31B sensor before dispense operation 4006200Bills is staying in Recommended Action: Enter management functions and configure the pin working key. Clear all errors and PURGE the dispenser. 4.

The most probable cause is either mechanical or electrical failure of the note diverter in the note transport module. Remove notes jammed in CDU 3.




© Copyright 2017 bookmarq.net. All rights reserved.